参数对照(29 项)
下表即转换引擎执行的翻译映射;同名键直接透传,不占行。
Bambu Studio → PrusaSlicer 键名对照
| Bambu Studio | PrusaSlicer |
|---|---|
| wall_loops | perimeters |
| sparse_infill_density | fill_density |
| sparse_infill_pattern | fill_pattern |
| top_surface_pattern | top_fill_pattern |
| bottom_surface_pattern | bottom_fill_pattern |
| initial_layer_print_height | first_layer_height |
| initial_layer_speed | first_layer_speed |
| initial_layer_infill_speed | first_layer_infill_speed |
| top_shell_layers | top_solid_layers |
| bottom_shell_layers | bottom_solid_layers |
| top_shell_thickness | top_solid_min_thickness |
| bottom_shell_thickness | bottom_solid_min_thickness |
| outer_wall_speed | external_perimeter_speed |
| inner_wall_speed | perimeter_speed |
| internal_solid_infill_speed | solid_infill_speed |
| top_surface_speed | top_solid_infill_speed |
| sparse_infill_speed | infill_speed |
| enable_support | support_material |
| nozzle_temperature_initial_layer | first_layer_temperature |
| bed_temperature_initial_layer | first_layer_bed_temperature |
| wall_generator | perimeter_generator |
| printable_area | bed_shape |
| enable_ironing | ironing |
| layer_change_gcode | layer_gcode |
| before_layer_change_gcode | before_layer_gcode |
取值换算
| 参数 | Bambu Studio 值 → PrusaSlicer 值 |
|---|---|
| support_material_style | |
| ironing_type | no ironing → top · all → solid |
| top_fill_pattern | monotonicline → monotoniclines |
| bottom_fill_pattern | monotonicline → monotoniclines |
- support_material_style 由支撑类型推导:auto/manual→grid(普通),tree→organic(树状)
常见问题
转换后还要在 PrusaSlicer 里调什么?
建议核对:打印机与喷嘴预设是否选对(转换器不替你选机器)、首层与悬垂处支撑、多色工程槽位顺序。
多色槽位会保留吗?
会。多色工程的耗材槽位顺序被保留并映射到目标的槽位/工具体系;单色工程不受影响。
打印机/工艺预设会一起过去吗?
转换器写入的是工程参数,不包含打印机预设——打开后选你的机型即可。涉及机器能力上限(加速度/速度)的项已按目标预设快照写入。