参数对照(31 项)
下表即转换引擎执行的翻译映射;同名键直接透传,不占行。
Prusa → Bambu 枢纽键名翻译
| PrusaSlicer 键 | 枢纽键 |
|---|---|
| perimeters | wall_loops |
| fill_density | sparse_infill_density |
| fill_pattern | sparse_infill_pattern |
| top_fill_pattern | top_surface_pattern |
| bottom_fill_pattern | bottom_surface_pattern |
| first_layer_height | initial_layer_print_height |
| first_layer_speed | initial_layer_speed |
| first_layer_infill_speed | initial_layer_infill_speed |
| top_solid_layers | top_shell_layers |
| bottom_solid_layers | bottom_shell_layers |
| top_solid_min_thickness | top_shell_thickness |
| bottom_solid_min_thickness | bottom_shell_thickness |
| external_perimeter_speed | outer_wall_speed |
| perimeter_speed | inner_wall_speed |
| solid_infill_speed | internal_solid_infill_speed |
| top_solid_infill_speed | top_surface_speed |
| infill_speed | sparse_infill_speed |
| support_material | enable_support |
| first_layer_temperature | nozzle_temperature_initial_layer |
| first_layer_bed_temperature | bed_temperature_initial_layer |
| perimeter_generator | wall_generator |
| ironing | enable_ironing |
| max_print_height | printable_height |
| layer_gcode | layer_change_gcode |
| before_layer_gcode | before_layer_change_gcode |
- 速度语义对齐:Prusa 无独立内墙键,perimeter_speed 兼内墙;external_perimeter_speed 即外墙
枚举名归一
| Bambu Studio 旧值 | OrcaSlicer 新值 |
|---|---|
| internal_solid_infill_pattern | zig-zag → rectilinear |
| ironing_pattern | zig-zag → rectilinear |
| support_ironing_pattern | zig-zag → rectilinear |
| ensure_vertical_shell_thickness | enabled → ensure_all |
- 同一套内核:除以下枚举更名与钳制外,参数键与取值同名透传
- 剔除键:different_settings_to_system
取值钳制
| 参数 | 钳制 |
|---|---|
| raft_first_layer_expansion | -1 → 0 |
| tree_support_wall_count | -1 → 0 |
- Bambu 的 -1(自动)目标软件不接受,按目标预设实测值收敛
常见问题
转换后还要在 OrcaSlicer 里调什么?
建议核对:打印机与工艺预设是否选对,多色槽位顺序,以及速度类参数是否匹配你的机器。
多色槽位会保留吗?
会。多色工程的耗材槽位顺序被保留并映射到目标的槽位/工具体系;单色工程不受影响。
打印机/工艺预设会一起过去吗?
Prusa 机器预设不随工程走——转换写入的是打印参数。Prusa 私有宏(含 M600 等)整族剔除,由目标机预设接管起止 G-code。